Skip to Content
Top
Defective Safety Gear Injuries

Suing for Safety Gear Defects in Garden City, NY

It Should Protect You, Not Betray You

After an accident, stress takes over. You’re hurt, frustrated, and probably wondering what went wrong. It’s even worse when the safety gear that was supposed to protect you actually failed. Helmets, harnesses, knee pads: these things are designed to keep you safe. But when they don’t work the way they should, the consequences can be devastating. That’s where experienced personal injury attorneys come in. They help you fight back when manufacturers put you at risk.

At Horn Wright, LLP, we’re here to help. If a defective helmet, faulty harness, or poorly designed safety product caused your injuries, you may have the right to compensation. Manufacturers have a duty to make reliable gear, and when they don’t, they should be held accountable. Let’s fight for the justice—and the compensation—you deserve.

When Helmets Fail: The Hidden Risks No One Talks About

You strap on a helmet expecting it to protect you. But what if it doesn’t? What if, instead of absorbing impact, it cracks on contact? Or worse, what if a defect makes your injuries even more severe? These risks are real, and they’re more common than you’d think.

Some of the biggest dangers come from:

  • Bad Design – Some helmets look great but don’t actually protect you. If the impact foam is too thin or the shape doesn’t properly distribute force, your head takes the full hit.
  • Weak Materials – Cheap plastics and low-quality foam break apart instead of cushioning impact. Some recalled helmets have cracked at speeds under 10 mph—imagine what happens in a real accident.
  • Manufacturing Defects – Even a great design means nothing if the factory cuts corners. Straps snap. Buckles break. A small mistake can turn a lifesaving helmet into a useless piece of plastic.

Helmets aren’t just accessories. They’re supposed to save lives. If yours didn’t, it’s not your fault—it’s the manufacturer’s.

Holding Manufacturers Accountable for Dangerous Safety Equipment

When companies put profits over protection, people get hurt. It’s that simple. Safety gear isn’t just another product—it’s something people trust with their lives. And yet, some manufacturers still cut corners, rush production, and ignore safety tests just to save a few bucks.

Here’s how it happens:

  • Skipping Safety Tests – Some companies don’t bother testing their products to see if they’ll actually work in real-world accidents. That’s how defective helmets, knee pads, and harnesses end up on store shelves.
  • Using Cheap Materials – Strong, durable materials cost more, so some manufacturers use weaker substitutes. The result? Gear that looks fine but falls apart when you need it most.
  • Ignoring Recalls – Some brands fight recalls for years, refusing to admit their product is dangerous. Meanwhile, people keep getting hurt.

It’s not right. And if you’ve been injured because of defective safety gear, you have every right to hold them accountable. Our team of personal injury attorneys knows how to take on big manufacturers and fight for your rights.

Can You Sue for a Manufacturer’s Failure to Warn You?

Absolutely. If a company knows its product has risks and doesn’t warn you, that’s negligence.

Think about it. What if:

  • A fire-resistant glove melts under extreme heat, but the company never mentioned that in the instructions?
  • A knee brace causes more injuries than it prevents, but the warning label downplays the risks?
  • A climbing harness has a history of snapping under certain conditions, but the manufacturer doesn’t recall it?

If they knew and didn’t tell you, that’s a serious legal issue. Companies can’t just hide dangers and expect people to figure it out the hard way. If you got hurt because of missing warnings, you may have a case.

How Expert Witnesses Prove That Safety Gear Was Defective

You know your gear failed. But proving it in court? That takes expert witnesses. These professionals break down exactly why a product was unsafe and how it led to your injuries.

Here’s how they help:

  • Engineering Experts – They analyze materials, design, and construction to show where the product failed. In one case, experts proved a helmet cracked because the plastic was too thin—something no consumer would’ve known.
  • Medical Experts – They explain how a defective product caused or worsened your injuries. If a helmet’s failure led to a concussion, they’ll make that clear.
  • Industry Regulators – They compare the product to legal safety standards. If a company skipped required testing, an expert can prove it in court.

Without experts, manufacturers deny everything. But with hard evidence, they can’t ignore the truth.

The Biggest Product Liability Cases That Exposed Deadly Safety Gear

History is full of cases where safety gear failed—and companies tried to cover it up. Some of the most infamous include:

  • Trinity Industries Guardrails – A manufacturer secretly changed its guardrail design to save money, making them deadlier in crashes. Instead of absorbing impact, they speared through vehicles. The company was eventually hit with $663 million in penalties.
  • 3M Military Earplugs – Sold to the U.S. military, these earplugs failed to block noise, leading to thousands of cases of hearing loss. 3M denied responsibility for years before agreeing to pay over $6 billion to veterans.
  • Peloton Treadmill Recall – The Peloton Tread+ had a dangerous design flaw that trapped small children underneath. Peloton downplayed the risk until a tragic child’s death forced them to recall the product in 2021.

These cases prove one thing: manufacturers don’t admit fault unless they’re forced to. That’s why taking legal action is so important. With skilled personal injury attorneys on your side, you can hold negligent companies accountable.

Injured by Defective Safety Gear? Horn Wright, LLP Can Help.

No one should suffer because of faulty safety equipment. If your gear failed when you needed it most, you deserve justice—and Horn Wright, LLP, is here to fight for it.

Our team of personal injury attorneys has the experience, the resources, and the dedication to hold manufacturers accountable. You focus on healing. We’ll handle the legal battle.

Want to hire one of the best law firms in AmericaCall us today for a free consultation. Let’s make things right.

What Sets Us Apart From The Rest?

Horn Wright, LLP is here to help you get the results you need with a team you can trust.

  • Client-Focused Approach
    We’re a client-centered, results-oriented firm. When you work with us, you can have confidence we’ll put your best interests at the forefront of your case – it’s that simple.
  • Creative & Innovative Solutions

    No two cases are the same, and neither are their solutions. Our attorneys provide creative points of view to yield exemplary results.

  • Experienced Attorneys

    We have a team of trusted and respected attorneys to ensure your case is matched with the best attorney possible.

  • Driven By Justice

    The core of our legal practice is our commitment to obtaining justice for those who have been wronged and need a powerful voice.